Dice-electronics DICE interface for iPod Volkswagen Manuel d'utilisateur télécharger pdf (Page 16)

5c - Cable modification - If vehicle is equipped with factory Satellite radio and desired to be retained, a harness

modification is required.

SAT

connector

1 Disconnect main radio

harness and locate SAT

connector. Remove it from

main harness by pressing on

the release tab of the SAT

connector.

2 Slide out the inner part of the

SAT connector from plastic

housing.

3 Disassemble the VW-R2

connector the same way as

the factory SAT connector.

4 Remove the SAT wires from

the factory connector by

releasing the pins with a

small screw driver or ball-

point pen.

5 Relocate wires to VW-R2

connector keeping the same

order and location.

6 Put plastic connector covers

back on. Insert VW-R2

connector to factory VW main

harness.

7 Connect ground wire to

chassis of radio.

VW-R2

connector

pins 1, 3, 7

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Pas de commentaire

Dice-electronics DICE interface for iPod Volkswagen Manuel d'utilisateur Page 16